Burgman 650 - DIY - Rear Brake Pads Replacement




People Who Liked This Video Also Liked

Suzuki Burgman 650 executive review!
Suzuki Burgman 650 executive review!
2016 Suzuki Burgman 650 ABS Executive Scooter Review
2016 Suzuki Burgman 650 ABS Executive Scooter Review
2016 Suzuki 650 Burgman Review from Argyll Motorsports Suzuki Demo Day.
2016 Suzuki 650 Burgman Review from Argyll Motorsports Suzuki Demo Day.
2006 Suzuki Bergman 650 test drive review
2006 Suzuki Bergman 650 test drive review
Burgman 650 Best Review
Burgman 650 Best Review

Did this video help you?

petpali: how mutch years old is that bike? i buyed new rear breake pads but they hasn't such forms..

ArcanePath360: After spending all morning I'm convinced that the back wheel needs removing before the back caliper can come off. I've no idea why, it looks like it comes off, but it just won't no matter what I do.

r ruiter: When pushing the pistons back , you should open the bleeder valve on the caliper. This will prevent dirty fluid from going back into your lines. Very important when you have ABS. The fluid inside the caliper is the dirtiest fluid since it constantly gets hot and cools down. Ideally do a brake flush after the caliper change as well. Very easy to do.

Joseph Totter: has any one done this on a 2011 or newer ? the brake caliper is on the front side not the rear as in this video and for teh life of me i cant get the caliper off, The spacing between the disc and the inside of the wheel causes the caliper to get stuck. Basically not enough space to slide the caliper off the disc before it hits the wheel

Rolando Perez: Can CNC Brake Clean be use on the caliper as well

Rafael Avila: Thank you for this great work, It's been very useful for me. But after replace the pads the caliper vibrates and make a funny noise, I repeat all the steps again and after few minutes the noise appears again, What do you think is happening? I consider to change the bolts of the caliper holder, but I'm not sure this was the problem. Any ideas, thank you in advance in any case. Your videos are the best,

svracer2001: Thanks for making this tutorial. I tried this process today. I have a question about the caliper shim (the small, square one). I didn't pay enough attention when I took it off, so I don't know what orientation to put it back on in. The few times I tried the shim just kept falling to the ground as I put the caliper back on the bike. Also, my insulators won't fit so I left them off. With the insulators, I can't get enough clearance between the brake pads at about the last 1/4" of re-install :(

ArcanePath360: @LeDude00 Unfortunately I live in UK, and from Google shopping, they're all quite expensive for a tool I will maybe use twice in my life. Perhaps I'll borrow one.... thanks

ArcanePath360: Thanks, I have a 400 but this helped me. I don't have a torque wrench though, does it really matter that much? Can I not just go by feel?

pernellandrew: Thanks very much love your vids keep up the good work :)

THEJEDEYEMASTER: how the hell do you keep you bike looking so good..? btw your vids are very helpful..even though I didn't get a Burgman yet. hopefully soon.. BRAVO man! love the flip flops..no green today..HAHA!

THEJEDEYEMASTER: how the hell do you keep you bike looking so good..? btw your vids are very helpful..evn though I didn't get a burgman yet. hopefully soon.. BRAVO man!
Rating:
Burgman 650 - DIY - Rear Brake Pads Replacement 5 out of 5

Featured Video

Video How to Guide

Latest Comments

philanna38: Don't understand why you would replace a 2 handle faucet with a new 2 handle faucet. Harder to clean and a pain in the arsh to use.
Team TinyTurtle: For those who missed it, you need to use the bracket keys [ ] to toggle the blob brush and eraser sizes. [ ]
Slim Apo: I don't have These Three options of Graphics, Medium, Low and Very Low I only Have High and Very High.
Taehun Lee: Amazing exhaust note!
shinta201: had mine for awhile. Overall I am pleased and would recomend them( they have more power in the latest model). Deep warm bass, and used as a floor monitor they sound excellent for voice.They would not be good for larger gigs as mains, but for small gigs they are awsome! The cabinet build is top notch and I would be happy if all speakers were the same. The only bad things is there is no audio jacks for mp3 players etc., and it only has xlr input and output.Overall I would buy them again( of course the newer models with more power,more input options, and black speaker grill...and same price!).
Tanner Collins: can you send me the links for the mods:)
kbchanna basappa: Cool Star Ramesh Aravind Sir Great Actor In KFI.My Fvrt Actor Cool Star Ramesh Sir Nenapina Aleyali & Something Something Songs Very Melody Songs 

Burgman 650 - DIY - Rear Brake Pads Replacement